● Material aluminum
● Output interface USB3.1 Type-C
● Master plan JMS583 (10Gbps)
● USB3.1 GEN2 10Gbps transmission rate
● The maximum capacity of 2TB support
● Mounting screws
● Support system Windows / Mac / Linux
ORICO M.2 NVME SSD Enclosure Case for NVME PCIE M Key M+B Key 10Gbps with Type C to C Cable M2PJ-C3 (Gray)
Product Features:-
COMPATIBILITY: ORICO Nvme SSD enclosure supports PCI-E based M key & (M+B) key M.2 NVME SSD, up to 2TB; SATA-based B Key & (B+M) Key M.2 SSD or PCIe AHCI SSD are not supported.
SLEEP MODE: It will automatically enter into sleep mode when there is no operation within 10 minutes. This helps to prolong the service life of your hard drive.
EASY TO USE: Hot-swappable, Plug & Play, No Driver required. And you can use it widely on computers and Android phones(Android device should have USB-C port and supports OTG)
NOTE:-
Only for NVMe M-Key M.2 SSD (PCIE-based). DOES NOT support M.2 SATA based SSD (NGFF).
To get 10Gbps data transmission rate, the USB 3.1 interface on your PC should be USB 3.1 Gen 2. Some PCs only comes with USB 3.1 Gen1 whose max speed is 5Gbps.
It is normal that the aluminum case heats up, for the high-speed NVMe M.2 drives generate much heat while working.
For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition.
| Model | M2PJ-C3 |
| Material | Aluminium Alloy + ABS Plastic |
| Input | M-Key |
| Output | USB 3.1 Type-C |
| Transmission Rate | USB 3.1 Gen2 10 Gbps |
| Transfer Rate | 10Gbps |
| Capacity | 2TB Max |
| Installation | Tool-free installation, fix with screws |
| Systems | Windows / Mac OS/ Linux |
| Dimensions | 106.5mm(L)*29mm(W)*11.5mm(H) |
| Transmission Rate | 10Gps |
1x ORICO M.2 NVME SSD Enclosure Case for NVME PCIE M Key M+B Key 10Gbps with Type C to C Cable M2PJ-C3 (Gray)
